wodle name="command"

Configuration options of the Command wodle.

Options

Main options

disabled
tag
command
ignore_output
timeout
verify_md5
verify_sha1
verify_sha256
skip_verification

Main options	Allowed values
disabled	yes, no
tag	A descriptive name
command	Command to be executed
ignore_output	yes, no
timeout	A positive number (seconds)
verify_md5	MD5 checksum
verify_sha1	SHA1 checksum
verify_sha256	SHA256 checksum
skip_verification	yes, no

disabled

Disable the Command wodle.

Default value	no
Allowed values	yes, no

tag

Descriptive name for the command.

Default value	N/A
Allowed values	Characters set

command

Path and arguments of the command to be executed.

Default value	N/A
Allowed values	An existing command Path to a binary Path to a script

ignore_output

Ignore the command output when executed.

Default value	no
Allowed values	yes, no

timeout

Timeout for each command to wait for the end of the execution. Whether this parameter is set to 0, it will wait indefinitely for the end of the process. However, if the timeout is other than 0, the execution will finish if it expires.

Default value	n/a
Allowed values	A positive number (seconds)

verify_md5

Verify the MD5 sum of the binary or the script specified on the command option.

Default value	n/a
Allowed values	MD5 checksum

verify_sha1

Verify the SHA1 sum of the binary or the script specified on the command option.

Default value	n/a
Allowed values	SHA1 checksum

verify_sha256

Verify the SHA256 sum of the binary or the script specified on the command option.

Default value	n/a
Allowed values	SHA256 checksum

skip_verification

Run the command defined, although the checksum does not match. In this case, the agent will log that the checksum verification failed but will run the application.

Default value	no
Allowed values	yes, no

run_on_start

Run command immediately when service is started.

Default value	yes
Allowed values	yes, no

interval

Time between commands executions.

Default value	2s
Allowed values	A positive number that should contain a suffix character indicating a time unit, such as, s (seconds), m (minutes), h (hours), d (days), M (months).

day

Day of the month to run the scan.

Default value	n/a
Allowed values	Day of the month [1..31]

Note

When the day option is set, the interval value must be a multiple of months. By default, the interval is set to a month.

wday

Day of the week to run the scan. This option is not compatible with the day option.

Default value	n/a
Allowed values	Day of the week: sunday/sun monday/mon tuesday/tue wednesday/wed thursday/thu friday/fri saturday/sat

Note

When the wday option is set, the interval value must be a multiple of weeks. By default, the interval is set to a week.

time

Time of the day to run the scan. It has to be represented in the format hh:mm.

Default value	n/a
Allowed values	Time of day [hh:mm]

Note

When only the time option is set, the interval value must be a multiple of days or weeks. By default, the interval is set to a day.

Centralized configuration

Remote commands may be specified in the centralized configuration, however, they are disabled by default due to security reasons.

When setting commands in a shared agent configuration, you must enable remote commands for Agent Modules.

This is enabled by adding the following line to the file etc/local_internal_options.conf in the agent:

wazuh_command.remote_commands=1

Example of configuration

<wodle name="command">
  <disabled>no</disabled>
  <tag>test</tag>
  <command>/bin/bash /root/script.sh</command>
  <interval>1d</interval>
  <ignore_output>no</ignore_output>
  <run_on_start>yes</run_on_start>
  <timeout>0</timeout>
  <verify_md5>5aada3704685dad6fd27beb58e6687de</verify_md5>
  <verify_sha1>da39a3ee5e6b4b0d3255bfef95601890afd80709</verify_sha1>
  <verify_sha256>292a188e498caea5c5fbfb0beca413c980e7a5edf40d47cf70e1dbc33e4f395e</verify_sha256>
</wodle>